Arsitek:: Energia

VENCO Vertikon H50

The VENCO Vertikon H50 is a wind turbine with flexible speed frequency. The robust construction features low maintenance needs and minimal noise emissions.

Due to its special design the VENCO Vertikon H50 is optimised for low windspeeds of Wind Class IV. It works reliable even under extreme conditions.

Technical Data
Rotor
Generator
Materials
Miscellaneous

Rotor blade type Vertical Axis Wind Turbine (VAWT)
Rated output 50 kW
Rated wind speed 12 m/s
Max. Power 55 kW
Cut-in wind speed 2.0 m/s, power producing at 2.5 m/s
Cut-off wind speed 13 m/s
Yaw control Not required

Rotor speed control Variable via Microprocessor
Survival wind speed 50 m/s
Rotor diameter 12.0 m
Blade height 12.5 m
Swept area 150.0 m2
Gear box type Spur gear
Gearing 1:29
Brake system Disc brake, short circuit

Generator type Asynchronus generator
Manufacturer Siemens
Voltage 0 to 400 V
Grid connection Via converter
Electronics SPS

Rods Epoxy glass resin
Mast Galvanised steel
Rotor blades Epoxi glass resin

Mast type Lattice tower
Hub height 35 m
Warranty period 2 Years
Technical changes preserved

VENCO-Twister-300-T Vertical Axis Wind Turbine

The VENCO Twister 300-T is designed to start rotating at 3.0 m/s wind speed and to produce power at a wind speed of 3.5 m/s.

Due to his special design the VENCO Twister 300-T is operating virtually quiet.

The robust construction is without wearing parts. It needs low maintenance and works reliable even under extreme conditions.

Technical Data
Rotor
Generator
Materials
Miscellaneous

Rotor type
Rated output
Rated wind speed
Cut-in wind speed
Cut-off wind speed
Rotor speed control
Survival wind speed
Rotor diameter
Blade height
Swept area
Gear box
Brake system

Max. Power
Yaw control
Vertical Axis Wind Turbine (VAWT)
300 W
3.5 m/s
25 m/s
Not required
Microcontroller guided
50 m/s
1.0 m
1.0 m
1.0 m2
No gear box
Generator short circuit
14 m/s
300 W

Generator type
Voltage
Electronics
Charge controller

Three-phase synchronus generator,
PM shrunk-on-disk-rotor.
0 to 70 V DC
Overvoltage and safety controller
12 / 24 V, 25 A max. carging current

Rods
Generator casing
Rotor blades

Stainless steel
Stainless steel
Epoxy glass and carbon resin

Weight without pole.
Warranty period.

apx. 52 kg
2 Years

VENCO-Twister-1000-TL Vertical Axis Wind Turbine

The VENCO-Twister-1000-TL is designed for the use in regions with low wind speeds.

It starts rotating at 1.5 m/s wind speed and to produce power at a wind speed of 3.5 m/s. Due to his special design the VENCO-Twister-1000-TL is operating virtually quiet.

The robust construction is without wearing parts. It needs low maintenance and works reliable even under extreme conditions.

Technical Data
Rotor
Generator
Materials
Miscellaneous

Rotor type
Rated output
Rated wind speed
Cut-in wind speed
Cut-off wind speed
Rotor speed control
Survival wind speed
Rotor diameter
Blade height
Swept area
Gear box
Brake system
Safety system
Max. Power
Yaw control

Vertical Axis Wind Turbine (VAWT)
12 m/s
1200 W
1000 W
3.5 m/s
13 m/s
Not required
Microcontroller guided
50 m/s
1.9 m
1.9 m
3.61 m2
No gear box
Short circuit
Self supplying generator control (patent pending)

Generator type
Voltage
Electronics

Three-phase synchronus generator,
PM shrunk-on-disk-rotor
0 to 400 V DC
Overvoltage and safety controller;
Prepared for grid inverter connection

Rods
Generator casing
Rotor blades

Galvanised steel
Galvanised steel / stainless steel
Epoxy glass and carbon resin

Weight incl. mini-pole
Warranty period

apx. 130 kg
2 Years

Content on this page requires a newer version of Adobe Flash Player.